Skip to main content
< All Topics



The Statistics tab shows you a broad range of information about your campaigns. It allows you to gain insights into the performance of your campaigns and diagnose problems when they occur. The Graph Data panel at the top of the screen shows you charts of data related to your campaigns, while the Table Data panel at the bottom shows you tables of important data for recent dates, as well as the cost of achieving selected goals.

The information in the Statistics tab is broken down across several tabs: DatesCampaigns & VariationsLanding PagesSites & ZonesCategoriesLocationsDevicesOSLanguagesBrowsersCarriersAd BlockVR, and Hour/Day Intervals.


By default, data is displayed using the New York time zone (EST or EDT). You should bear this in mind when analyzing statistics shown for your own time zone.

However, you can change the statistics time zone by clicking on your Statistics page and selecting the Hour tab. In the bottom right of the graph on this tab, you can set the time zone for your data based on your country targeting.

Saving Custom Filter Set


Using the Save Report option, you can save filter sets on the statistics page, give this filter set a custom name, and choose from a list of previously saved filter sets.

Saving a report

As a user, the default view of the statistics tab will not have any filters applied. You can either save a filter report by adding a few filters of your choice or choose from the list of already saved filters to obtain the desired view.


  • The Statistics page will be reset once you leave to go to another page in Admin Panel.
  • You can see the list of saved filters in the Saved Reports dropdown.
  • The order of sorting the Saved reports will be the latest one created on top.

Update the existing report or Save As a new report



  • You can update an existing saved report by selecting it, changing the filters and then clicking on the Update button.
  • The filter setting will be updated and saved under the chosen Saved Report.

Save As

  • You can also save an existing filter set with another name by clicking on the Save As option.
  • Or you can also Save As a new report by adding or removing a few filters from this set.

Rename, Delete a Saved Reports


Using the action buttons against each saved report in the Saved Report drop-down, you can either edit or delete a report.

  • The Pencil Icon helps rename a Saved Report. Note that no two reports can have the same name.
  • The Bin icon helps delete a Saved Report. Note once a report it deleted, you cannot undo this action.  

Multi-filtering your data in the Statistics tab


Note: Clicking on This Month will allow you to choose a date/date range to view statistics for. You can choose a date as far back as January 2019.

You can filter the statistics showing in the currently selected tab using the multi-filtering options at the top of the screen. You can add multiple filters together to gain insights into your data. For example, if you are viewing costs for days in the Dates tab, you could choose to break that down by country and then further break it down by browser.

Using the filtering feature

To filter the currently selected tab by CountryCampaignsCategories etc. click on the +ADD FILTER button and select the item you wish to filter by.

Tick the boxes beside the items you wish to view, and click APPLY. The results that you see will be filtered by the items that you have selected.

You can add more filters after the first one. For example, you might want to filter by Country and then by Device.

You can also filter the data by date, by clicking on the calendar icon to the left of the +ADD FILTER button.


In the calendar box, you can select the time period you wish to view data for, either by dragging the mouse over the days you wish to select, or selecting from the predefined values:

  • Today
  • Yesterday
  • Last 7 days
  • Last 30 days
  • This Month
  • Last Month

Note: Choosing This Month in the Calendar will only show data for this month up to the current date.

Note: You can also drill down into your data in the Table Data panel. Doing this will automatically add a filter to the multifilter bar at the top of the Statistics tab.

The Graph Data Panel

Choosing what to display in the graphs


For any of the tabs in the Statistics tab, you can choose what information you would like to see in the graphs in the top half of the screen:  


All the tabs in the Statistics tab allow you to view charts for CostsCPCClicksImpressionsVideo ImpressionsViewsViews RatioCPVCPMCTR and various Goals.

The following tabs all show a single pie chart with drop-down with the above options: Campaigns and VariationsLanding PagesSites & ZonesCategoriesDevicesOSLanguagesBrowsersCarriers, and VR.

However, in the Dates tab, you can view two of the above items presented in two concurrent line and bar graphs. You can break these down by HourDayWeekMonth or Year by clicking on the sub-tabs.

In the Locations tab, you can roll over the world map to see your data broken down by country. You can zoom in and out of the map using the + and  buttons on the left.

The Table Data Panel


The Table Data panel shows the data in the Graph Data Panel in tabular format. In the Show X entries drop-down in the top right of the Table Data panel, you can choose how many lines of data you wish to see in the table. You can also click the arrows beside any of the column headers and sort the data from lowest to highest value.

The Table Data panel contains a General Panel on the left and a Goals Panel on the right. The General panel shows general data about the item on the far left and the Goals panel shows more informative metrics relating to the goals performance.

Note: When in the Campaigns & Variations > Variations tab, you can pause campaigns and variations directly from the Table Data panel. This can be useful when you identify under-performing campaigns from viewing your statistics.

pause variation

The General Panel

In the General Panel you will see the item you are viewing data for on the far left, and to the right the associated data, including ImpressionsClicksCPMCostsCTR, and CPC. You may also see video statistics here if you enable them in the toggle options on the top-right of the Table Data panel.

Note: The tabs DatesCampaigns & VariationsLanding PagesSites & ZonesLocations, and VR are broken down into sub-tabs. When on one of these tabs, clicking items in the General panel will drill down into the related subtab. For example, clicking a campaign in the Campaigns panel will take you to the Variations sub-tab, which will show variations of that campaign.

The Goals Panel


The Goals panel shows the below metrics on selected goals:

  • Conversion: Number of conversions that take place.
  • eCPA: effective Cost Per Acquisition.
  • Conversion Rate: Records the percentage of users who have completed a desired action.
  • Profit: Determines the amount by which the Advertiser is profitable based on the revenue and cost metrics.
  • Revenue: A monetary income that the Advertiser earns from the number of conversions that take place.
  • ROI(Return on Investment): A ratio between net income and investment.

Each column in the Goals data can be sorted from highest to lowest using the arrows at the top of each column.

You can learn more about setting up a goal here

The Real Time Bidding Panel


The Real Time Bidding panel shows the statistics of various related metrics achieved through real-time auctions that occur when an ad is requested by a page.

  • Queries shows the number of bid requests sent to the advertiser.
  • Success shows the number of bid requests that were successful and received a response with no errors.
  • Wins shows the number of bid requests that won the auction.
  • No Bid shows the number of bid requests that did not return a bid.
  • Errors shows the number of bid requests that did not go through the bidding process due to some errors.
  • Average CPM is a metric calculated as rtb_value / ( rtb_success – rtb_no_bid – rtb_skipped ) * 1000 / 100
  • Average Time shows the Average time taken between a request and response.
  • Timeouts shows the number of bid requests that were timed out with no response.
  • Skipped shows the number of bid requests that where automatically throttled by the system.
  • Win Ratio shows the percentage of wins against the total number of queries.
  • Resp. Ratio shows the percentage of bid response against the total number of queries.
  • Timeout Ratio shows the percentage of requests that have timed out against the total number of queries.
  • No Bid Ratio shows the percentage of requests that did not make it to the bid against the total number of queries.
  • Errors Ratio shows the percentage of Bid requests with errors against the total number of queries.
  • Skipped Ratio shows the percentage of Skipped requests against the total number of queries.

Each column in the Real Time Bidding data can be sorted from highest to lowest using the arrows at the top of each column.

Toggle Options


The Toggle Options are found in the top right of the Table Data Panel.

  • By clicking on the General drop-down menu, you can switch on and off the general metrics in the General panel data: DateImpressionsClicksCPMCostsCTRCPC.
  • By clicking on the Video drop-down, you can switch on and off the video related metrics in the Video panel: VideoImpressionsViewsViews RatioCPV.
  • By clicking on the Goals drop-down, you can switch on and off the goals related metrics in the Goals panel: G(x)eCPA(x). Where (x) is the a specific goal.
  • By clicking on the Real Time Bidding drop-down, you can switch on and off the RTB related metrics in the Real Time Bidding panel: Avg CPMAvg TimeErrorsErrors RatioNo BidNo Bid RatioQueriesResp. RatioSkippedSkipped RatioSuccessTimeoutsTimeouts RatioWin RatioWins.

Downloading a CSV file of your statistics

You can click on the Download CSV button which has two options:

  • Choose Download Visible Data to download just the data that is visible in the table. This will download only the columns that you have chosen to see using the toggle settings for GeneralVideoGoalsReal Time Bidding Panels.
  • Choose Download All Data to download all the available data. This will download everything regardless of what you have chosen to see in the table.

Copy Visible Data


You can also copy the data in the Table Data so that you can paste it elsewhere, such as an Excel sheet. Above the Table Data you will see the Copy Visible Data option. This will copy only the columns that you have chosen to see using the toggle settings for GeneralVideoGoalsReal Time Bidding Panels.

Table of Contents
Translate »